How can I programatically read the SD Card's CID register, which contains a Serial Number and other information? Can I do it through Android Java, or Native code? Thanks in advance, Eric. Stack Overflow. Log In Sign Up. How to read the SD Card ID number? Ask Question 15. Re-write the number, separating the numbers into pairs. For example, if the number is 5224656B then you would write “52 24 65 6B.” Put the number into reverse format to get the SD card ID. So, “52 24 65 6B” would be “6B652452.” This final number is the SD card ID.

Internal SD Card Information Information about an SD card is encoded in its internal card registries. One of these is the Card Identification (CID) Register, a 16 byte code that contains information that uniquely identifies the SD card, including the card serial number (PSN), manufacturer ID number (MID) and manufacture date (MDT). The CID register is set when the card is manufactured and cannot be changed after it is set. (According to SD card specification the information is only to be written once, however if a card does not conform to the specification this information could be changed!) How to read the CID from an SD card One way to read the CID is to use a laptop with an SD card slot. Card readers in laptops are usually connected directly through the PCI bus (or IDE bus). This will not work through a USB card reader because the command to retrieve the card information is intercepted and not understood by card readers. Not all computers with built-in card slots will work, some internal card readers are connected through a USB bus.

Assuming you have the proper hardware, there are several methods you can use to get the card information. With Linux, reading the internal SD card information is simple. Insert the card and look under /sys/block/mmcblk0/device/ (this location may change depending on your platform, it may be mmcblk1 or in a different location). Under this location you will see several available that include the CID and CSD registers and the information inside it. To view the CID, the command is cat /sys/block/mmcblk0/device/cid (the exact location may be different) What information is in the CID? The following information is stored in the CID: Name Field Linux attribute* Description Manufacturer ID MID manfid Assigned by SD-3C, LLC. OEM/Application ID OID oemid Identifies the card OEM and/or the card contents.

Assigned by SD-3C, LLC. Product Name PNM name 5 characters long (ASCII) Product Revision PRV hwrev, fwrev Two binary coded decimal (BCD) digits. Each is four bits. The PRV is in the form x.y. The PRV can also be found by using the hwrev and fwrev, where x=hwrev and y=fwrev Serial Number PSN serial This 32 bit field is intended to be read as an unsigned integer Manufacture Date Code MDT date Manufacture date is stored in the form yym (offset from 2000) CRC7 checksum CRC 7 bit code used for checking errors in the card register * these are the attribute titles used for the card in Linux For more information, refer to the. I just wanna feel this moment download mp3. List of Common Manufacturer ID (MID) Manufacturer ID (MID) are assigned by the SD Assoication (SD-3C LLC). They consider this information confidential so an official list is not published.